Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.
Standard Equipment
CAT 190 / 190 ED
High performance mower, counterspring suspended, 2 mower drums with 3 knives each, quick knife change
Standard equipment:
Mounting:
moveable 3 - point rear mounting for Cat. II
Transport:
raised hydraulically to the side for transport position
Drive:
mower drums driven by a P.T.O shaft gearbox and submerged in grease, P.T.O. speed 540 rpm
Breakaway device:
mechanically
Suspension:
2 adjustable countersprings
P.T.O.:
P.T.O. drive shaft with freewheel
Hydraulic connections:
1 single acting valve
Further:
stone guard, spare knives, knife key, parking supports, P.T.O. drive shaft with disc clutch.
Extra-dry (ED) conditioning:
Conditioner with EXTRA DRY wide spread system, adjustable to different crop densities, with rubber- mounted tines, quick release couplings for fitting and removal.
CAT 230 PLUS / ED
High - performance mower, quick knife change system, encapsulated cutting height adjustment with constant ring gap between 30 and 60 mm
Standard equipment:
Mounting:
moveable 3 - point rear mounting for Cat. II
Transport:
raised hydraulically to the side and mechanical pivot for transport position
Drive:
mower drums driven by a P.T.O with freewheel, P.T.O. speed 540 rpm
Breakaway device:
mechanically
Suspension:
2 adjustable countersprings
P.T.O.:
P.T.O. drive shaft with freewheel
Hydraulic connections:
1 single acting valve
Further:
centre pivot suspension for cutter bar, stone guard, spare knives, knife key, lifting lugs, P.T.O. drive shaft with disc clutch
Extra-dry (ED) conditioning:
Conditioner with EXTRA DRY wide spread system, adjustable to different crop densities, with rubber- mounted tines, quick release couplings for fitting and removal.
PLUS variable cutting level adjustment from 30 to 60 mm with continuous ring gap
EUROCAT drum-type mowers
The newly-developed drums on the EUROCAT drum-type mowers deliver high-quality work in all conditions.
The ultimate design of drum body tackles the densest of crops without problem.
Not affected by dirt.
Swath can be placed using swath formers.
Changing from conditioner with wide-spread to swath formers takes just minutes.
Best crop flow
Low-slung design - trouble-free transfer from mower disc to conditioner.
Inner drum bodies are smaller diameter for improved clearance.
Heavy-duty inside body with large bearings.
Outer mower drum is bolted to gear trough for straightforward removal.
The big plus ...
EUROCAT with infinitely-variable cutting height adjustment system
The height of all 4 drums can be adjusted simultaneously from above.
The heavy-duty adjustment system is fully sealed in a metal housing encapsulated by a rubber boot.
Benefits:
Smooth working and always easy to adjust.
Easy access.
Cutting height adjustable from 35 to 60 mm.
High-cut saucers optional (20 mm extra cutting height).
Exemplary
Drum mounting bolted to gear trough - easy access from outside.
Central cutting height adjustment system on EUROCAT plus All 4 drums adjusted simultaneously from above.
Extra-dry-conditioner
Extra dry conditioners carefully rub the layer of wax covering the crop. The forage is then deposited across the full width in an airy blanket. The power of the sun has immediate and full effect. Advantages of the "extra dry" technology:
Shorter drying period in the field, less risk from the weather.
Increasing energy content by up to 10% saves on concentrates.
Better silage quality due to rapid reduction in PH-value
No tedding (or less tedding) required, which saves time and simplifies the process.
New roller conditioner The roller conditioner is especially suitable for lucerns and clovers due to its precision conditioning capabilities.
The profile of the new Pöttinger roller conditioner is spiral-shaped. The rollers intermesh to uniformly squash the stalks and produce a uniform blanket of forage. On Pöttinger conditioners both rollers are driven. The degree of conditioning can be adjusted by altering the spring-loading of the upper roller.
Conditioners with V-shaped tines
The wide rotor ensures that even really large quantities pass through easily. Robust bearing assemblies on either side.
Conditioned crop spread over the full width - thin layer, optimized degree of conditioning.
V-shaped conditioner tines on all units mounted on Pöttinger mowersarranged in a spiral for a smooth flow of forage without torque peaks
The steel tines are mounted in rubber bushes.
Impact from foreign objects is absorbed and the crop is protected
Removable in minutes ... If you don't need the conditioner you simply remove it; e.g. for the daily green feed requirement. Open two quick-release coupling pins, release the rotor drive belt tensioner and remove the belts. Attach auxiliary wheels on either side and wheel the complete conditioner away - it's as easy as that.
IMPORTANT!
Steel fingers with rubber dampers. The absorption characteristics of the rubber elements protect the conditioner and the forage.
Plastic fingers on NOVACAT 225/265 ED for lower weight so that they can be operated using smaller tractors.
Remove on your own Release coupling pins - remove v-belts - wheel the conditioner away.
Rotor drive l No additional angular gear unit required. l Power is transmitted direct from the cutter bar shaft to the rotor using drive belts.
The ultimate: "Floating cut" with countersprung carrier frame and centre pivot suspension
Adjustable mounting pins for full width mowing without driving
over existing swath
Always handy -toolbox in frame for spare knives and accessories.
Reliable drive shaft fitted with universal joint, freewheel and overload protection.
Automatic breakaway device provides reliable protection against damage.
Bevel gears with precission ground teeth run smoothly.
Encapsulated cutting height adjustment.
Wide pivot arc for improved adaptation to uneven ground and embankments.
Time is money
Mower drum can be removed without dismantling gears. CAT 230 / plus / ED with 2,25 m working width
Lift system
For field transport the mower is just raised to the side, the tractor hydraulic ram is always in the same position and does not need to be readjusted. Pivoted upwards
Easy access for servicing, changing knives, and adjusting cutting height. Breakaway device
The pivoting mechanism for road transport also serves as the safety path for the breakaway device. Three transport positions on CAT 230 plus / plus ED
Raised hydraulically to the side.
Pivoted to the rear and raised - minimal transport width (centre of gravity close to tractor).
deutsch
english
français
español / latino america
italiano
český
slovak
polski
dansk
suomi
українська
pусский
north america
EUROCAT front-mounted drum m
